7.0 Inch Monitor Touch Screen DMG80480L070_01WTR(Consumer Grade)

Specification

DWIN 800*480，UART LCM

Features:

● T5L platform , 7.0 Inches, 16.7M Colors, 800*480 Pixel TFT LCD;

● Resistive touch panel;

● Support 90 degrees, 180 degrees, 270 degrees screen rotation;

● TTL/RS232 available;

● 8Pin_2.0mm connection wire;

● Two Development modes: DGUS II/ TA(Instruction set);

● Support animation ,data ,text ,curve display and so on ,without any code ;

● Independent GUI and OS kernal ,OS can be programmed by DWIN OS language or Keil C51.

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

6.0~15.0V, typical value of 12V

Operating Current

VCC=12V, max backlight

VCC=12V, backlight off

Recommended power supply: 12V 1A DC

Video

Hardware and interface description

LCM interface	FPC50_0.5mm, RGB interface
RTP interface	Resistive touch: FPC4_1.0mm
User interface	8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash	16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Buzzer	3V passive buzzer. Power: <1W
SD card interface	FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
PGT05 interface	When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

Display Parameters

LCD Type	TN, TFT LCD
Viewing Angle	Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution	800×480 pixels (0°/90°/180°/270°)
Color	24-bit 8R8G8B
Active Area (A.A.)	153.8mm (W) ×85.6mm (H)
Backlight Mode	LED
Backlight Service Life	>10000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness	DMG80480L070_01WTR: 200nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type	RTP (Resistive touch panel)
Structure	ITO film + ITO glass
Touch Mode	Single touch and support continuous sliding touch
Surface Hardness	3H
Light Transmittance	Over 80%
Life	Over 1,000,000 times touch

Serial Interface Parameters

Mode	Mode is determined by Jumper: (Default to TTL/CMOS mode) ON =TTL/CMOS; OFF=RS232
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1, Iout = -4mA	4.78	5.0	-	V
	Output 0, Iout = 4mA	-	-	0.4	V
	Input 1	2.5	5.0	-	V
	Input 0	0	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	N81
Interface Cable	8Pin_2.0mm

Electrical specifications

Operating environment