TC041C12W00 / U00
| Hardware and interface | |||||
| No. | Name | Description | |||
| 1 | T5L1 ASIC | Developed by DWIN. Mass production in 2019,1MBytes Nor Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times | |||
| 2 | LCM interface | FPC40_0.5mm,MIPI interface | |||
| 3 | CTP interface | FPC2_1.25mm,IIC interface | |||
| 4 | User Interface | For power supply and serial communication, 4Pin_ 2.0mm seat | |||
| 5 | Flash | 16MBytes NOR Flash, for fonts, pictures and audio files. | |||
| Rewrite cycle: over 100,000 times | |||||
| 6 | Speaker | On-board speaker. Rated power: 1W | |||
| 7 | RTC | Super-capacitor for power supply. Accuracy: ±20ppm @25℃. It can work normally for 7 days after power failure. | |||
| 8 | WIFI Module | TC041C12W00:Built-in WIFI-10 module | |||
| TC041C12U00:None | |||||
| 9 | SD card interface | FAT32. Download files by SD card interface can be displayed in statistics. Download rate: 4Mb/s | |||
| Display parameters | |||||
| LCD Type | IPS, TFT LCD | ||||
| Viewing Angle | Wide viewing angle, 85°/85°/85°/85° (L/R/U/D) | ||||
| Resolution | 720*720 pixels (0°/90°/180°/270°) | ||||
| Color | 24-bit 8R8G8B | ||||
| Active Area (A.A.) | 74mm (W) * 74mm (H) | ||||
| Backlight Mode | LED | ||||
| Backlight Service Life | >20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) | ||||
| Brightness | 300nit | ||||
| Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range) | ||||
| Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. | |||||
| Touch Parameters | |||||
| Touch Type | CTP (Capacitive Touch Panel) | ||||
| Structure | In-cell (Without Cover Lens) | ||||
| Touch Mode | Finger, up to 2 touches simultaneously. | ||||
| Light Transmittance | Over 90% | ||||
| Life | Over 1,000,000 times touch | ||||
| Interface Parameters | |||||
| Mode | RS485 | ||||
| Voltage Level | Test Condition | Min | Typ. | Max | Unit |
| Output 1 | 2.5 | 5 | - | V | |
| Output 0 | - | -5 | -2.5 | V | |
| Input 1 | 0 | 2.5 | - | V | |
| Input 0 | - | -2.5 | -0.2 | V | |
| Baud Rate | 3150~3225600bps, typical value of 115200bps | ||||
| Interface Cable | 4Pin_2.0mm | ||||
| Electrical specifications | |||||
| Rated Power | <5W | ||||
| Operating Voltage | 6.5~36.5V, typical value of 12V | ||||
| Operating Current | 270mA | VCC=12V, max backlight | |||
| 200mA | VCC=12V, backlight off | ||||
| Recommended power supply: 12V 0.5A DC | |||||
| Environment | |||||
| Operating Temperature | -10℃~60℃ | ||||
| Storage Temperature | -20℃~70℃ | ||||
| Operating Humidity | 10%~90%RH, typical value of 60% RH | ||||
| ESD Test | |||||
| Discharge Type | Discharge Value | Result | |||
| Contact discharge | ±4KV | Normal operation | |||
| Air discharge | ±4KV | Normal operation | |||
| High and Low Temperature Test | |||||
| Temperature | Result | ||||
| High temperature(60℃) | Normal operation | ||||
| Low temperature(-10℃) | Normal operation | ||||
| Packing Capacity & Dimension | |||||
| Dimension | 88(W) *88(H) * 16.1(T) mm | ||||
| Net Weight | 111g | ||||
| Packing Capacity | |||||
| Model | Dimension | Layer | Quantity/Layer | Quantity (Pcs) | |
| Carton1: | 220mm(L)*160mm(W)*47mm(H) | 1 | 2 | 2 | |
| Carton2: | 250mm(L)*200mm(W)*80mm(H) | 2 | 2 | 4 | |
| Carton3: | 320mm(L)*270mm(W)*80mm(H) | 2 | 4 | 8 | |
| Carton4: | 450mm(L)*350mm(W)*300mm(H) | - | - | - | |
| Carton5: | 600mm(L)*450mm(W)*300mm(H) | 1 | 56 | 56 | |
