15 Inch Touch Monitor
DMG10768T150_01W(Industrial Grade)

Specification

DWIN 1024*RGB*768,UART LCM

Features:

● Based on T5L2 ASIC, 16.7M color, with conformal coating

● Touch Screen: Resistive/Capacitance

● Interface: TTL / RS232

● GUI project via UART 2 on-line serial port downloading or SD card

● Edit under the newest DGUS V7.6 software tool, no coding skills required;

● Running DGUS II system

● TN, TFT LCD, normal viewing angle

● Support data/string display, page changing, animation play, real time clock and many other functions

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

12~36V, typical value of 12V

Operating Current

VCC=12V, max backlight

VCC=12V, backlight off

Recommended power supply: 12V 1A DC

Video

Hardware and interface description

User interface	8Pin_2.0mm socket for power supply and serial communication
Flash	32MBytes (2*16MBytes NOR Flash) for storing UI files like fonts, images, music, with over 100,000 erase/write cycles
Expand Flash pads	Two expansion slots support NOR or NAND Flash, up to 64MB (4x16MB NOR Flash) or 48MB+512MB (3x16MB NOR Flash + 512MB NAND Flash).
Buzzer	3V passive buzzer.
RTC	Super-capacitor supplies power to RTC, accuracy: ±20ppm @25℃. Can maintain normal operation for 7 days after power-off
SD card slot	For DGUS project file downloads (UI, CFG files, kernel, etc.), 4 Mb/s rate
Reserved module interface	Supports DWIN WiFi modules (e.g., WIFI-20) and USB download modules (e.g., HDL702)
PGT05 interface	For programming DGUS firmware

Display Parameters

LCD Type	TN, TFT LCD
Viewing Angle	Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution	1024×768 pixels (0°/90°/180°/270°)
Active Area (A.A.)	304.13mm (W)×228.10mm (H)
Backlight Mode	LED
Backlight Service Life	>30,000 hours
Brightness	DMG10768T150_01WTC: 300nit
	DMG10768T150_01WTR: 300nit
	DMG10768T150_01WN: 350nit
Brightness Control	100-level brightness adjustment (Flickering may occur at 1%-30% of max brightness; not recommended for use in this range)
Note: Use dynamic screen saver to prevent afterimages from prolonged fixed page display.

Touch Parameters

Type	Capacitive touch panel
Structure	G+G structure with tempered glass surface and hardness ≥ 6H
Light Transmittance	>85%

Type	RTP (Resistive touch panel)
Structure	ITO film + ITO glass
Light Transmittance	78%±3%

Serial Interface Parameters

Mode	UART2: ON=TTL/CMOS; OFF=RS232 UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1, Iout = -4mA	4.78	5.0	-	V
	Output 0, Iout = 4mA	-	-	0.4	V
	Input 1	2.5	5.0	-	V
	Input 0	-	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	8Pin_2.0mm

Electrical specifications

Operating environment