12.1 Inch Intelligent LCD Display with Enclosure DMG80600T121_15WTR (Industrial Grade)

Features:

● Based on T5L1, running DGUS II system ;

● 12.1-inch, 800*600 pixels resolution, 16.7M colors, TN-TFT-LCD ;

● With conformal coating, with shell;

● 16MBytes NOR Flash, for fonts, pictures and audio files;

● Easy-to-use DWIN DGUS  GUIS Development, no coding skills required;

● Super-capacitor for power supply;

● RS232,RS485 interface support MODBUS Protocol.


Specification

Product Tags

Specification

国际站PCB模板
HDL配件
Hardware and interface description
LCM interface Connector 20Pin_1.25mm, LVDS interface
User interface 6Pin_3.81mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Expand Flash pads Three expansion slots are available, supporting expansion of NOR Flash and NAND Flash. The maximum expansion for NOR Flash is up to 64Mbytes. When combining NOR Flash and NAND Flash, the maximum expansion is up to 48Mbytes (using two expansion slots) + 512Mbytes.
Speaker Onboard speaker. Power: 2W
SD card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
Reserved module interface Wi-Fi module: connect to the cloud platform to update remotely;
USB module: download files by USB flash disk
PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal
Display Parameters
LCD Type TN, TFT LCD
Viewing Angle Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution 800×600 pixels (0°/90°/180°/270°)
Color 24-bit 8R8G8B
Active Area (A.A.) 246.0mm (W) ×184.5mm (H)
Backlight Mode LED
Backlight Service Life >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness DMG80600T121_15WTR: 300nit
Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
Touch Parameters
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Light Transmittance 78%±3%
Serial Interface Parameters
Mode UART2: RS232
UART4: RS485 ( Only available after OS configuration)
UART2
Voltage Level
Test Condition Min Typ Max Unit
Output 1 - -5.0 -3.0 V
Output 0 3.0 5.0 - V
Input 1 -15.0 -5.0 - V
Input 0 - 5.0 15.0 V
UART2
Baud Rate
3150~3225600bps, typical value of 115200bps
UART4
Voltage Level
Test Condition Min Typ Max Unit
Output 1 2.5 5.0 - V
Output 0 - -5.0 -2.5 V
Input 1 0 2.5 - V
Input 0 - -2.5 -0.2 V
UART4
Baud Rate
3150~921600bps, typical value of 115200bps
Data Format UART2: N81
UART4: N81/E81/O81/N82 ,4 modes (OS configuration)
Interface Cable 6Pin_3.81mm Socket
Electrical specifications
Rated Power <10W
Operating Voltage 9~36V, typical value of 12V
Operating Current 650mA VCC=12V, max backlight
180mA VCC=12V, backlight off
Recommended power supply: 12V 1A DC
Operating environment
Operating Temperature -20℃~70℃ (12V @ 60% RH)
Storage Temperature -30℃~80℃
Conformal Coating Yes
Operating Humidity 10%~90%RH, typical value of 60% RH
Application

1

12 (1)


  • Previous:
  • Next:

  • Related Products