Specification
Description
Product Tags
Hardware and interface description
| User interface |
8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s |
| Flash |
32MBytes (2*16MBytes NOR Flash), can be used to store user UI files such as fonts, images, music, etc., with erase/write cycles >100,000 times |
| Expand Flash pads |
Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash+512Mbytes NAND Flash |
| Buzzer |
3V passive buzzer |
| RTC |
Super-capacitor for power supply. Accuracy: ±20ppm @25℃. It can work normally for 7 days after power failure |
| SD card slot |
FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s |
| Reserved module interface |
Wi-Fi module: connect to the cloud platform to update remotely. USB module: download files by USB flash disk |
| PGT05 interface |
When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal |
Display Parameters
| LCD Type |
IPS process TFT display screen |
| Viewing Angle |
Wide viewing angle (typical values are 85°/85°/85°/85°), high contrast, and good color reproduction |
| Resolution |
1024×768 pixels (support 0°/90°/180°/270°) |
| Color |
24-bit 8R8G8B |
| Active Area (A.A.) |
210.20mm (W)×158.40mm (H) |
| Backlight Mode |
LED |
| Backlight Service Life |
>30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) |
| Brightness |
DMG10768T104_09WTC: 800nit |
| DMG10768T104_09WTR: 750nit |
| DMG10768T104_09WN: 900nit |
| Brightness Control |
0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
| Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. |
Touch Parameters
| Type |
Capacitive touch panel |
| Structure |
G+G structure with tempered glass surface and hardness ≥ 6H |
| Light Transmittance |
>85% |
| |
| Type |
RTP (Resistive touch panel) |
| Structure |
ITO film + ITO glass |
| Light Transmittance |
78%±3% |
Serial Interface Parameters
| Mode |
UART2: ON=TTL/CMOS; OFF=RS232
UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration) |
| Voltage Level |
Test Condition |
Min |
Typ |
Max |
Unit |
| Output 1, Iout = -4mA |
4.78 |
5.0 |
- |
V |
| Output 0, Iout = 4mA |
- |
- |
0.4 |
V |
| Input 1 |
2.5 |
5.0 |
- |
V |
| Input 0 |
- |
- |
1.0 |
V |
| Baud Rate |
3150~3225600bps, typical value of 115200bps |
| Data Format |
UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration) |
| Interface Cable |
8Pin_2.0mm |
Electrical specifications
| Rated Power |
<10W |
| Operating Voltage |
6~36V, typical value of 12V |
| Operating Current |
610mA |
VCC=12V, max backlight |
| 210mA |
VCC=12V, backlight off |
| Recommended power supply: 12V 1A DC |
Operating environment
| Operating Temperature |
-20℃~70℃ (12V @ 60% RH) |
| Storage Temperature |
-30℃~80℃ |
| Conformal Coating |
Yes |
| Operating Humidity |
10%~90%RH, typical value of 60% RH |
Previous: 10.1 Inch Industrial Highlight UART Display
DMG10600T101_09W(Industrial Grade)
Next: 5 Inch INCELL Smart LCD HMI Touch Panel
DMG12720T050_06WTC (Industrial Grade)
