PriceList for Interactive Lcd Touch Screen - 7 inch COF touch screen DMG80480F070_01W (COF Series) – DWIN Detail:
Video
Specification
ASIC Information
T5L0 ASIC | Developed by DWIN. Mass production in 2020,1MBytes Nor Flash on the chip, 128Kbytes variable storage space for exchanging data with OS CPU Core and memory. Rewrite cycle: over 100,000 times |
Display
Color | 262K colors | ||
LCD Type | TN, TFT LCD | ||
Viewing Angle | Normal viewing angle, typical value of 70°/70°/30°/40°(L/R/U/D) | ||
Display Area(A.A) | 154.08mm (W)×85.92mm (H) | ||
Resolution | 800×480 | ||
Backlight | LED | ||
Brightness | DMG80480F070_01WN: 250nit | ||
DMG80480F070_01WTR: 200nit |
Touch Parameters
Type | RTP (Resistive touch panel) | ||
Structure | ITO film + ITO glass | ||
Touch Mode | Support point touch and drag | ||
Surface Hardness | 3H | ||
Light Transmittance | Over 80% | ||
Life | Dotting > 1,000,000 times; Stroke > 100,000 times; 150g force, back and forth counted as twice |
Voltage & Current
Power Voltage | 4.5~5.5V | ||
Operation Current | VCC = +5V, Backlight on, 410mA | ||
VCC = +5V, Backlight off, 115mA |
Reliability Test
Working Temperature | -10℃~60℃ | ||
Storage Temperature | -20℃~70℃ | ||
Working Humidity | 10%~90%RH, typical value of 60% RH |
Interface
Baudrate | 3150~3225600bps | ||
Output Voltage | Output 1, Iout = 8mA; Min.3.0 | ||
Output 0, Iout =-8mA; Max.0.3 V | |||
Input Voltage(RXD) | Input 1, Iin = 1mA;Typ 3.3V | ||
Input 0, Iin = -1mA;0~0.5V | |||
Interface | UART2: TTL; | ||
UART4: TTL;( Only available after OS configuration) | |||
UART5: TTL;(Only available after OS configuration | |||
Data Format | UART2: N81; | ||
UART4: N81/E81/O81/N82; 4 modes (OS configuration) | |||
UART5: N81/E81/O81/N82; 4 modes (OS configuration) | |||
Socket | 50Pin_0.5mm FP | ||
Flash | 8M Bytes | ||
Accessories (Optional) | HDL662S, SD cable, USB cable (accessories are not including) |
Peripheral
PIN | Definition | I/O | Functional Description |
1 | +5V | I | Power supply, DC3.6-5.5V |
2 | +5V | I | |
3 | GND | GND | GND |
4 | GND | GND | |
5 | GND | GND | |
6 | AD7 | I | 5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling. |
7 | AD6 | I | |
8 | AD5 | I | |
9 | AD3 | I | |
10 | AD2 | I | |
11 | +3.3 | O | 3.3V output, maximum load of 150mA. |
12 | SPK | O | External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. |
13 | SD_CD | IO | SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface. |
14 | SD_CK | O | |
15 | SD_D3 | IO | |
16 | SD_D2 | IO | |
17 | SD_D1 | IO | |
18 | SD_D0 | IO | |
19 | PWM0 | O | 2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3 |
20 | PWM1 | O | |
21 | P3.3 | IO | If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V. |
22 | P3.2 | IO | |
23 | P3.1/EX1 | IO | It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes. |
24 | P3.0/EX0 | IO | It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes. |
25 | P2.7 | IO | IO interface |
26 | P2.6 | IO | IO interface |
27 | P2.5 | IO | IO interface |
28 | P2.4 | IO | IO interface |
29 | P2.3 | IO | IO interface |
30 | P2.2 | IO | IO interface |
31 | P2.1 | IO | IO interface |
32 | P2.0 | IO | IO interface |
33 | P1.7 | IO | IO interface |
34 | P1.6 | IO | IO interface |
35 | P1.5 | IO | IO interface |
36 | P1.4 | IO | IO interface |
37 | P1.3 | IO | IO interface |
38 | P1.2 | IO | IO interface |
39 | P1.1 | IO | IO interface |
40 | P1.0 | IO | IO interface |
41 | UART4_TXD | O | UART4 |
42 | UART4_RXD | I | |
43 | UART5_TXD | O | UART5 |
44 | UART5_RXD | I | |
45 | P0.0 | IO | IO interface |
46 | P0.1 | IO | IO interface |
47 | CAN_TX | O | CAN interface |
48 | CAN_RX | I | |
49 | UART2_TXD | O | UART2(UART0 serial port of OS core) |
50 | UART2_RXD | I |
Application
Product detail pictures:
Related Product Guide:
We always stick to the principle Quality First, Prestige Supreme. We are fully committed to providing our clients with competitively priced quality products, prompt delivery and professional service for PriceList for Interactive Lcd Touch Screen - 7 inch COF touch screen DMG80480F070_01W (COF Series) – DWIN, The product will supply to all over the world, such as: Sri Lanka , Germany , Latvia , They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we have been going to have a bright prospect and to be distributed all over the world in the years to come.
By Joseph from Rio de Janeiro - 2018.06.18 19:26
Fast delivery. Get the correct product as desired. The packaging is neat and safe for the product, very good.
By Andy from Vancouver - 2017.05.02 11:33