Manufacturer for Lcd Monitor Touchscreen - 4.0 Inch Intelligent Display Model: DMG48480F040_01W (COF Series) – DWIN Detail:
Video
		Specification
	
				
				
				
			Display
| Color | 262K colors | ||
| LCD Type | IPS-TFT-LCD | ||
| Viewing Angle | Wide viewing angel, typical value of 85°/85°/85°/85°(L/R/U/D) | ||
| Display Area(A.A) | 71.86mm (W)×70.18mm (H) | ||
| Resolution | 480*480 | ||
| Backlight | LED | ||
| Brightness | DMG48270F043_01WN:260nit DMG48480F040_01WTC:230nit DMG48480F040_01WTCZ01:230nit DMG48480F040_01WTCZ02:65nit | ||
Touch parameters
| Type | CTP (Capacitive Touch Panel) | ||
| Structure | G+G structure | ||
| Touch Mode | Support point touch and drag | ||
| Surface Hardness | 6H | ||
| Light Transmittance | Over 90% | ||
| Life | Over 1,000,000 times touch | ||
Voltage & Current
| Power Voltage | 4.5~5.5V, typical value of 5V | ||
| Operation Current | 245mA, VCC=5V, max backlight | ||
| 75 mA, VCC=5V, backlight off | |||
External Interface
| Pin | Definition | I/O | Functional Description | 
| 1 | 5V | I | Power supply, DC3.6-5.5V | 
| 2 | 5V | I | |
| 3 | GND | GND | GND | 
| 4 | GND | GND | |
| 5 | GND | GND | |
| 6 | AD7 | I | 5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling. | 
| 7 | AD6 | I | |
| 8 | AD5 | I | |
| 9 | AD3 | I | |
| 10 | AD2 | I | |
| 11 | 3.3 | O | 3.3V output, maximum load of 150mA. | 
| 12 | SPK | O | External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. | 
| 13 | SD_CD | I/O | SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface. | 
| 14 | SD_CK | O | |
| 15 | SD_D3 | I/O | |
| 16 | SD_D2 | I/O | |
| 17 | SD_D1 | I/O | |
| 18 | SD_D0 | I/O | |
| 19 | PWM0 | O | 2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3 | 
| 20 | PWM1 | O | |
| 21 | P3.3 | I/O | If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V. | 
| 22 | P3.2 | I/O | |
| 23 | P3.1/EX1 | I/O | It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes. | 
| 24 | P3.0/EX0 | I/O | It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes | 
| 25 | P2.7 | I/O | IO interface | 
| 26 | P2.6 | I/O | IO interface | 
| 27 | P2.5 | I/O | IO interface | 
| 28 | P2.4 | I/O | IO interface | 
| 29 | P2.3 | I/O | IO interface | 
| 30 | P2.2 | I/O | IO interface | 
| 31 | P2.1 | I/O | IO interface | 
| 32 | P2.0 | I/O | IO interface | 
| 33 | P1.7 | I/O | IO interface | 
| 34 | P1.6 | I/O | IO interface | 
| 35 | P1.5 | I/O | IO interface | 
| 36 | P1.4 | I/O | IO interface | 
| 37 | P1.3 | I/O | IO interface | 
| 38 | P1.2 | I/O | IO interface | 
| 39 | P1.1 | I/O | IO interface | 
| 40 | P1.0 | I/O | IO interface | 
| 41 | UART4_TXD | O | UART4 | 
| 42 | UART4_RXD | I | |
| 43 | UART5_TXD | O | UART5 | 
| 44 | UART5_RXD | I | |
| 45 | P0.0 | I/O | IO interface | 
| 46 | P0.1 | I/O | IO interface | 
| 47 | CAN_TX | O | CAN interface | 
| 48 | CAN_RX | I | |
| 49 | UART2_TXD | O | UART2(UART0 serial port of OS core) | 
| 50 | UART2_RXD | I | 
Product detail pictures:





Related Product Guide:
Assume full accountability to fulfill all demands of our purchasers; attain continual advancements by marketing the advancement of our clientele; grow to be the final permanent cooperative partner of purchasers and maximize the interests of purchasers for Manufacturer for Lcd Monitor Touchscreen - 4.0 Inch Intelligent Display Model: DMG48480F040_01W (COF Series) – DWIN, The product will supply to all over the world, such as: New Zealand , Istanbul , Turkey , After years of development, we have formed strong ability in new product development and strict quality control system to ensure excellent quality and service. With the support of many long term cooperated customers, our products are welcomed all over the world.
 By Mandy
 from Islamabad
 - 2018.09.16 11:31
 By Mandy
 from Islamabad
 - 2018.09.16 11:31
                                    Hello. Thank you for your support. We plan to apply DWIN GP to various development products.
 By Edwina
 from Mexico
 - 2018.11.04 10:32
 By Edwina
 from Mexico
 - 2018.11.04 10:32
                                    


 
            




