Low MOQ for Nextion Touch Screen - 7 inch COF touch screen DMG80480F070_01W (COF Series) - DWIN

Send email to us

Specification

Product Tags

Feedback (2)

Our staff through skilled training. Skilled skilled knowledge, potent sense of company, to satisfy the provider requirements of consumers for 10.1 Tft Lcd Monitor , Tft Monitori , Tft In Car , If you are interested in any of our products and services, please don't hesitate to contact us. We are ready to reply you within 24 hours after receipt of your request and to create mutual un-limited benefits and business in near future.

Low MOQ for Nextion Touch Screen - 7 inch COF touch screen DMG80480F070_01W (COF Series) – DWIN Detail:

Video

Specification

DMG80480F070_01W
ASIC Information

T5L0 ASIC

Developed by DWIN. Mass production in 2020,1MBytes Nor Flash on the chip, 128Kbytes variable storage space for exchanging data with OS CPU Core and memory. Rewrite cycle: over 100,000 times

Display

Color			262K colors
LCD Type			TN, TFT LCD
Viewing Angle			Normal viewing angle, typical value of 70°/70°/30°/40°(L/R/U/D)
Display Area（A.A）			154.08mm (W)×85.92mm (H)
Resolution			800×480
Backlight			LED
Brightness			DMG80480F070_01WN: 250nit
			DMG80480F070_01WTR: 200nit

Touch Parameters

Type			RTP (Resistive touch panel)
Structure			ITO film + ITO glass
Touch Mode			Support point touch and drag
Surface Hardness			3H
Light Transmittance			Over 80%
Life			Dotting > 1,000,000 times; Stroke > 100,000 times; 150g force, back and forth counted as twice

Voltage & Current

Power Voltage			4.5~5.5V
Operation Current			VCC = +5V, Backlight on, 410mA
			VCC = +5V, Backlight off, 115mA

Reliability Test

Working Temperature			-10℃~60℃
Storage Temperature			-20℃~70℃
Working Humidity			10%~90%RH, typical value of 60% RH

Interface

Baudrate			3150~3225600bps
Output Voltage			Output 1, Iout = 8mA; Min.3.0
			Output 0, Iout =-8mA; Max.0.3 V
Input Voltage（RXD）			Input 1， Iin = 1mA；Typ 3.3V
			Input 0， Iin = -1mA；0~0.5V
Interface			UART2: TTL;
			UART4: TTL;（ Only available after OS configuration）
			UART5: TTL;（Only available after OS configuration
Data Format			UART2: N81;
			UART4: N81/E81/O81/N82; 4 modes (OS configuration)
			UART5: N81/E81/O81/N82; 4 modes (OS configuration)
Socket			50Pin_0.5mm FP
Flash			8M Bytes
Accessories (Optional)			HDL662S, SD cable, USB cable (accessories are not including)

Peripheral

PIN	Definition	I/O	Functional Description
1	+5V	I	Power supply, DC3.6-5.5V
2	+5V	I	Power supply, DC3.6-5.5V
3	GND	GND	GND
4	GND	GND
5	GND	GND
6	AD7	I	5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling.
7	AD6	I
8	AD5	I
9	AD3	I
10	AD2	I
11	+3.3	O	3.3V output, maximum load of 150mA.
12	SPK	O	External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level.
13	SD_CD	IO	SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface.
14	SD_CK	O
15	SD_D3	IO
16	SD_D2	IO
17	SD_D1	IO
18	SD_D0	IO
19	PWM0	O	2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3
20	PWM1	O
21	P3.3	IO	If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V.
22	P3.2	IO
23	P3.1/EX1	IO	It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
24	P3.0/EX0	IO	It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
25	P2.7	IO	IO interface
26	P2.6	IO	IO interface
27	P2.5	IO	IO interface
28	P2.4	IO	IO interface
29	P2.3	IO	IO interface
30	P2.2	IO	IO interface
31	P2.1	IO	IO interface
32	P2.0	IO	IO interface
33	P1.7	IO	IO interface
34	P1.6	IO	IO interface
35	P1.5	IO	IO interface
36	P1.4	IO	IO interface
37	P1.3	IO	IO interface
38	P1.2	IO	IO interface
39	P1.1	IO	IO interface
40	P1.0	IO	IO interface
41	UART4_TXD	O	UART4
42	UART4_RXD	I	UART4
43	UART5_TXD	O	UART5
44	UART5_RXD	I	UART5
45	P0.0	IO	IO interface
46	P0.1	IO	IO interface
47	CAN_TX	O	CAN interface
48	CAN_RX	I	CAN interface
49	UART2_TXD	O	UART2（UART0 serial port of OS core)
50	UART2_RXD	I	UART2（UART0 serial port of OS core)

Application

Product detail pictures:

Related Product Guide:

Our personnel are always inside the spirit of continuous improvement and excellence, and together with the outstanding excellent goods, favorable price and good after-sales services, we try to gain every customer's trust for Low MOQ for Nextion Touch Screen - 7 inch COF touch screen DMG80480F070_01W (COF Series) – DWIN, The product will supply to all over the world, such as: Ghana , Bolivia , Saudi Arabia , With excellent solutions, high quality service and sincere attitude of service, we ensure customer satisfaction and help customers create value for mutual benefit and create a win-win situation. Welcome customers all over the world to contact us or visit our company. We'll satisfy you with our qualified service!

7 Inch Lcd Display Screen

7 Inch Lcd Touch Screen

7 Inch Touch Screen Display

Arduino Display Lcd

Capacitive Touch Panel

Hdmi Touchscreen

Small Touch Screen Display

Smart Tft Lcd Module

Tft Specific Analog Rgb

DWIN is a reliable partner to work with. They always provide customers with timely and professional technical support. And that helps me a lot in product development.