DWIN 1.54 Inch Circular Rotary Screen DMG24240C015_13WN(Commercial Grade)

Specification

Features:

● Based on T5L0, running DGUS II system, commercial grade

● Circular rotary screen with encoder shell

● 240*240 Pixels resolution, 262K Colors, IPS-TFT-LCD, Wide viewing angle

● Active Area (A.A.): Diameter=26.8mm

● >20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

4.5~5.5V, typical value of 5V

Operating Current

VCC=5V, max backlight

VCC=5V, backlight off

Recommended power supply: 5V 0.2A DC

Video

Hardware and interface description

T5L0 ASIC	Developed by DWIN. Mass production in 2020,1MBytes Nor Flashonthechip,512KBytes used to store the user database. Rewrite cycle: over 100,000times
LCM interface	FPC12_0.5mm, 4SPI interface
User interface	6Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
USB interface	MICRO USB, power supply interface (5V)
Flash	16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
SD card interface	FPC10_0.5mm interface, without SD card slots, external adapter board is required for downloading: 154-SDK. FAT32, Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
PGT05 interface	When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

Display Parameters

LCD Type	IPS, TFT LCD
Viewing Angle	Wide viewing angle, 85°/85°/85°/85°（L/R/U/D）
Resolution	240×240 pixels (0°/90°/180°/270°)
Color	18-bit 6R6G6B
Active Area (A.A.)	Diameter=26.8mm
Backlight Mode	LED
Backlight Service Life	>20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness	-
Brightness Control	Non adjustable
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Mechanical Characteristics

Detent Torque	Only suitable for C.C, equipment.: 300±100gf.cm
Number and Position of Detents	Only suitable for C.C, equipment.: 24 detents (Step angle : 15°±3°)
Rotational Life	The shaft of encoder shall be rotated to 30,000 cycles at a speed of 600~1000/h without electrical load, after which measurements shall be made
Switch Circuit and Number of Pulse	Single pole and single throw (push on)
Travel of Switch	1.7±0.5mm
Operating Force	6±3N (610±306gf)

Serial Interface Parameters

Electrical specifications

Operating environment