China Gold Supplier for Interactive Touch Screen Table - 4.3 Inch COF Structure Touch Screen Model:DMG48270F043_02W (COF Series) - DWIN

Send email to us

Specification

Product Tags

Feedback (2)

We goal to see good quality disfigurement within the manufacturing and provide the most effective support to domestic and overseas shoppers wholeheartedly for Tft Lcd Tv Monitor , Waterproof Tft Display , 17 Inch Tft , Please sense no cost to speak to us anytime. We are going to reply you when we receive your inquiries. Remember to note that samples are available before we start our business enterprise.

China Gold Supplier for Interactive Touch Screen Table - 4.3 Inch COF Structure Touch Screen Model:DMG48270F043_02W (COF Series) – DWIN Detail:

Specification

DMG48270F043_02W
Display

Color	262K colors
LCD Type	IPS-TFT-LCD,
Viewing Angle	Wide viewing angel, typical value of 85°/85°/85°/85°(L/R/U/D)
Active Area（A.A）	95.04mm (W)×53.86mm (H)
Resolution	480×272
Backlight	LED
Brightness	DMG48270F043_02WN:250nit
	DMG48270F043_02WTR: 200nit
	DMG48270F043_02WTC: 200nit
	DMG48270F043_02WTCZ01:200nit
	DMG48270F043_02WTCZ02:50nit

Voltage & Current

Power Voltage	3.6~5.5V, typical value of 5V
Operation Current	VCC=5V, max backlight, 220mA
Operation Current	VCC=5V, backlight off, 100mA

Interface

User interface	50Pin_0.5mm FPC
Baudrate	3150~3225600bps
Output Voltage	Output 1; 3.0~3.3 V
Output Voltage	Output 0; 0~0.3 V
Input Voltage （RXD）	Input 1; 3.3V
Input Voltage （RXD）	Input 0; 0~0.5V
Interface	UART2: TTL;
	UART4: TTL;（ Only available after OS configuration）
	UART5: TTL;（Only available after OS configuration
Data Format	UART2: N81;
	UART4: N81/E81/O81/N82;4 modes (OS configuration)
	UART5: N81/E81/O81/N82;4 modes (OS configuration)

External Interface

Pin	Definition	I/O	Functional Description
1	+5V	I	Power supply, DC3.6-5.5V
2	+5V	I	Power supply, DC3.6-5.5V
3	GND	GND	GND
4	GND	GND
5	GND	GND
6	AD7	I	5 input ADCs. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage. Except for AD6, the rest data is sent to OS core via UART3 in real time with 16KHz sampling rate. AD1 and AD5 can be used in parallel, and AD3 and AD7 can be used in parallel, which equals to two 32KHz sampling AD. AD1, AD3, AD5, AD7 can be used in parallel, which equals to a 64KHz sampling AD; the data is summed 1024 times and then divided by 64 to obtain a 64Hz 16bit AD value by oversampling.
7	AD6	I
8	AD5	I
9	AD3	I
10	AD2	I
11	+3.3	O	3.3V output, maximum load of 150mA.
12	SPK	O	External MOSFET to drive buzzer or speaker. The external 10K resistor should be pulled down to the ground to ensure that power-on
13	SD_CD	I/O	SD/SDHC interface,The SD_CK connects a 22pF capacitor to GND near the SD card interface.
14	SD_CK	O
15	SD_D3	I/O
16	SD_D2	I/O
17	SD_D1	I/O
18	SD_D0	I/O
19	PWM0	O	2 16-bit PWM output. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level. The OS core can be controlled in real time via UART3
20	PWM1	O
21	P3.3	I/O	If using RX8130 or SD2058 I2C RTC to connect to both IOs, SCL should be connected to P3.2,and SDA connected to P3.3 in parallel with 10K resistor pull-up to 3.3V.
22	P3.2	I/O
23	P3.1/EX1	I/O	It can be used as an external interrupt 1 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
24	P3.0/EX0	I/O	It can be used as an external interrupt 0 input at the same time, and supports both low voltage level or trailing edge interrupt modes.
25	P2.7	I/O	IO interface
26	P2.6	I/O	IO interface
27	P2.5	I/O	IO interface
28	P2.4	I/O	IO interface
29	P2.3	I/O	IO interface
30	P2.2	I/O	IO interface
31	P2.1	I/O	IO interface
32	P2.0	I/O	IO interface
33	P1.7	I/O	IO interface
34	P1.6	I/O	IO interface
35	P1.5	I/O	IO interface
36	P1.4	I/O	IO interface
37	P1.3	I/O	IO interface
38	P1.2	I/O	IO interface
39	P1.1	I/O	IO interface
40	P1.0	I/O	IO interface
41	UART4_TXD	O	UART4
42	UART4_RXD	I	UART4
43	UART5_TXD	O	UART5
44	UART5_RXD	I	UART5
45	P0.0	I/O	IO interface
46	P0.1	I/O	IO interface
47	CAN_TX	O	CAN interface
48	CAN_RX	I	CAN interface
49	UART2_TXD	O	UART2(UART0 serial port of OS core)
50	UART2_RXD	I	UART2(UART0 serial port of OS core)

Application

Product detail pictures:

Related Product Guide:

Our corporation insists all along the quality policy of product top quality is base of organization survival; purchaser pleasure will be the staring point and ending of an company; persistent improvement is eternal pursuit of staff plus the consistent purpose of reputation very first, purchaser first for China Gold Supplier for Interactive Touch Screen Table - 4.3 Inch COF Structure Touch Screen Model:DMG48270F043_02W (COF Series) – DWIN, The product will supply to all over the world, such as: Toronto , Nepal , Belgium , If any item be of interest to you, you should let us know. We will try our best to satisfy your requirements with high quality goods, the best prices and prompt delivery. You should feel free to contact us at any time. We will reply you when we receive your inquiries. Make sure you note that samples are available before we start our business.

10 Tft Lcd Monitor

800x480 Lcd Display

Arduino Lcd Module

Hmi Touch Screen

Monitor Tft 7 Inch

Multi Touch Lcd Screen

Rgb Tft Display

Tft 12.1

Tft Lcd Touch Screen

DWIN is a reliable partner to work with. They always provide customers with timely and professional technical support. And that helps me a lot in product development.