8.0 Inch CVBS Camera Screen DMT80600T080_25W

Specification

Features:

● Based on T5L ASIC 8.0 inch

● TN TFT LCD, normal viewing angle

● Support CVBS analog signal input, both N system and P sysytem

● Support speaker, analog video input(CVBS signal), built-in RTC

● Running DGUSII system, 800xRGBx600, 65k colors

●Support 0°/90°/180°/270° rotated dispaly

Send email to us Datasheet

Rated Power

Operating Voltage

6~36V, typical value of 12V

Operating Current

VCC=12V, max backlight

VCC=12V, backlight off

Recommended power supply: 12V 0.5A DC

Video

ASIC

Hardware and Interface Description

Display Parameters

Touch Parameters

Serial Interface Parameters

Electrical specifications

Operating environment

Peripheral

Previous: AC/DC Wide input voltage Low power consumption Small size Full protections High reliability Medical Power Module: ADM360K240S001A

Next: 2.1 Inch Circular Smart LCD
DMG48480C021_03W (Commercial Grade)

LCM interface	FPC50_0.5mm, RGB interface
TP interface	CTP: FPC6_0.5mm, IIC interface
TP interface	RTP: 4Pin_1.0mm interface
User interface	8Pin_2.54mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash	16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Buzzer	3V passive buzzer. Power: <1W
Speaker interface	2Pin_ 2.0mm external loudspeaker
RTC	Button cell for power supply. Accuracy: ±20ppm @25℃
SD card interface	FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
Camera interface	2pin_2.0mm(Support CVBS analog signal input,both N system and P system)
PGT05 interface	When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal

LCD Type	TN, TFT LCD
Viewing Angle	Normal viewing angle, 70°/70°/50°/70° (L/R/U/D)
Resolution	800×600 pixels (support 0°/90°/180°/270°)
Color	16-bit 5R6G5B
Active Area (A.A.)	162.60mm (W)×122.20mm (H)
Backlight Mode	LED
Backlight Service Life	>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness	DMT80600T080_25WTC: 300nit
Brightness	DMT80600T080_25WTR: 250nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid after images caused by fixed page display for a long time.

Type	CTP (Capacitive touch panel)
Structure	G+G structure with surface cover of tempered glass
Touch Mode	Support point touch and drag
Surface Hardness	6H
Light Transmittance	Over 90%
Life	Over 1,000,000 times touch

Type	RTP (Resistive touch panel)
Structure	ITO film + ITO glass
Touch Mode	Support point touch and drag
Surface Hardness	3H
Light Transmittance	Over 80%
Life	Over 1,000,000 times touch

Mode	UART2: ON=TTL/CMOS; OFF=RS232(Defaulted RS232) UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1, Iout = -4mA	2.7	3.2	-	V
	Output 0, Iout = 4mA	-	0.1	0.4	V
	Input 1	2.4	3.3	5.5	V
	Input 0	0	-	1.0	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	8Pin_2.54mm

DMT80600T080_25WTR	Resistive touch panel, speaker, CVBS video input, build-in RTC
DMT80600T080_25WTC	Capacitive touch panel, speaker, CVBS video input, build-in RTC