Specification
| T5L1 ASIC | Flash on the chip, 512KBytes used to store the user database. Rewrite cycle: over 100,000 times | |||||
| LCM interface | FPC40_0.5mm, RGB interface | |||||
| RTP interface | FPC4_1.0mm | |||||
| User interface | 10Pin_3.81mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s | |||||
| Flash | 32MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times | |||||
| Expand Flash | Expandable to 64Mbytes NOR Flash or 48Mbytes NOR Flash +512Mbytes NAND Flash | |||||
| Speaker | Onboard speaker. Power: <2W | |||||
| RTC | Super-capacitor for power supply. Accuracy: ±20ppm@25℃. It can work normally for 7 days after power failure | |||||
| SD card interface | FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s | |||||
| Reserved module interface | Wi-Fi module: connect to the cloud platform to update remotely USB module: download files by USB flash disk | |||||
| PGT05 interface | When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal | |||||
| LCD Type | IPS-TFT-LCD |
| Viewing Angle | Wide viewing angle, 85°/85°/85°/85°（L/R/U/D） |
| Resolution | 800×480 pixels (support 0°/90°/180°/270°) |
| Color | 24-bit 8R8G8B |
| Active Area (A.A.) | 152.40mm (W)×91.40mm (H) |
| View Area (V.A.) | - |
| Backlight Mode | LED |
| Backlight Service Life | >50000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness) |
| Brightness | DMG80480S070_03WN:1000nit DMG80480S070_03WTR:800nit |
| Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
| Type | RTP (Resistive touch panel) |
| Structure | ITO glass + ITO film |
| Touch Mode | Support point touch and drag |
| Surface Hardness | 3H |
| Light Transmittance | Over 80% |
| Life | Over 1,000,000 times touch |
| Mode | UART2: RS232 UART4: RS232（ Only available after OS configuration) UART5: RS485（ Only available after OS configuration) CAN*1 |
|||||
| UART2,4 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
| Output 1 | - | -5.0 | -3.0 | V | ||
| Output 0 | 3.0 | 5.0 | - | V | ||
| Input 1 | -15.0 | -5.0 | - | V | ||
| Input 0 | - | 5.0 | 15.0 | V | ||
| UART2,4 Baud Rate |
3150~3225600bps, typical value of 115200bps | |||||
| UART5 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
| Output 1 | 2.5 | 5.0 | - | V | ||
| Output 0 | - | -5.0 | -2.5 | V | ||
| Input 1 | 0 | 2.5 | - | V | ||
| Input 0 | - | -2.5 | -0.2 | V | ||
| UART5 Baud Rate |
3150~921600bps, typical value of 115200bps | |||||
| Data Format | UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration) UART5: N81/E81/O81/N82 ,4 modes (OS configuration) |
|||||
| Interface Cable | 10Pin_3.81mm | |||||
| Rated Power | <6W | |||||
| Operating Voltage | 7~36V, typical value of 12V | |||||
| Operating Current | 430mA | VCC=12V, max backlight | ||||
| 60mA | VCC=12V, backlight off | |||||
| Recommended power supply: 12V 1A DC | ||||||
| Operating Temperature | -40℃~85℃ (12V @ 60% RH) | |||||
| Storage Temperature | -40℃~85℃ | |||||
| Conformal Coating | Yes | |||||
| Operating Humidity | 10%~90%RH, typical value of 60% RH | |||||
| DMG80480S070_03WN | No touch,RTC, Speaker |
| DMG80480S070_03WTR | Resistive touch, RTC, Speaker |
