-
7.0 Inch Medical UART Touch Display DMG12800K070_03W (Medical Grade)
Features:
● Based on DWIN T5L1 ASIC, 16.7M Color, 24bit, 1280*800 Pixel;
● No touch screen/Resistive touch screen/Capacitive touch screen can be selected;
● IPS-TFT-LCD, wide viewing angle, 85°/85°/85°/85°(L/R/U/D);
● Download through SD card or on-line serial port;
● Easy-to-use DWIN DGUS V7.6 GUIs development, no coding skills required;
-
7 Inch Intelligent LCD Display with Shell DMG80480T070_15WTR (Industrial Grade)
Features:
● Based on T5L1, running DGUS II system ;
● With built-in speaker, LED lamp and Photosensitive sensor.;
● With conformal coating, with shell，IP65 protective level;
● 16MBytes NOR Flash, for fonts, pictures and audio files;
● Easy-to-use DWIN DGUS V7.6 GUIS Development, no coding skills required;
● Super-capacitor for power supply;
● RS232,RS485 interface support MODBUS Protocol.
-
7.0 Inch Medical UART Display DMG10600K070_03W(Medical Grade)
Features:
● Based on T5L2 ASIC, medical grade product;
● Support RS232 and RS485 communication;
● 16.7M colors, IPS-TFT-LCD;
● With PGT05 interface and reserved module interface;
● 16MBytes NOR Flash, for fonts, pictures and audio files.;
-
7.0 Inch Monitor Touch Screen DMG80480L070_01WTR(Consumer Grade)
Features:
● T5L platform , 7.0 Inches, 16.7M Colors, 800*480 Pixel TFT LCD;
● Resistive touch panel;
● Support 90 degrees, 180 degrees, 270 degrees screen rotation;
● TTL/RS232 available;
● 8Pin_2.0mm connection wire;
● Two Development modes: DGUS II/ TA(Instruction set);
● Support animation ,data ,text ,curve display and so on ,without any code ;
● Independent GUI and OS kernal ,OS can be programmed by DWIN OS language or Keil C51.
-
7 Inch Display With Control Board DMG12800T070_01W(Industrial grade)
Features:
● 7 inch 1280*800 resolution
● OS kernel adopts classic 8051 core, open for the second-development
● 32MBytes NOR Flash, can be extended to 64Mbytes;
● Super-capacitor for power supply, last 30 days after power off;
●Download files by SD interface can be displayed in statistics.
●Display can be changed to each direction via cfg setting
●6~36V operating voltage, typical value of 12V
●With conformal coating, suitable for the harsh environment.
-
7 inch HMI TFT LCD Touch DMG80480C070_06W(Commercial grade)
Features:
● Based on T5L ASIC 7.0 inches, 800*RGB*480, 16.7M Colors,TN screen,
● No touch / Resistive touch panel Optional,
● TTL and CMOS Interface,10Pin_1.0mm FPC
● Download by SD card or on-line serial port
● Development Platform : TA / DGUSⅡ ( DGUSⅡ pre-installed )
● Normal viewing, 70°/70°/50°/70°（L/R/U/D）
● Software DWIN DGUS V7.6GUI Development, no code can be designed by UI designer;
● With GUI&OS dual-core, GUIs with many controls ,DWIN OS kernel is open to the user for the second-development, through DWIN OS language or KELI C52.
-
7 Inch Smart TFT LCD Display DMG10600C070_03W(Commercial grade)
Features:
● Based on T5L ASIC 7.0 Inches, 1024xRGBx600, 16.7M Colors, IPS screen;
● None/Resistive /Capacitive touch panel;
● UART2: ON=TTL/CMOS; OFF=RS232;UART4: ON=TTL/CMOS; OFF=RS232; 10Pin_1.0mm FCC Socket;
● Download methods:via SD card or on-line serial port;
● Easy-to-use DWIN DGUS V7.6 GUIs Development.no coding skills required;
● Dual Development System:DGUS Ⅱ/TA(Instruction set);
● LCD:IPS View Angle:85/85/85/85(L/R/U/D);
● With GUI & OS dual-core, GUI with rich controls. DWIN OS kernel is open to the user for the second-development, via DWIN OS language or KEIL C51.
-
7.0 Inch Best Selling DGUS LCM DMG80480T070_05W（Industrial Grade)
Features:
● Based on T5L0 ASIC 7.0 Inch,800xRGBx480,262K Colors, TN screen;
● Touch mode: None touch ,Resistive, Capacitive ;
● TTL and RS232 optional ;
● Support SD card and DGUS tool on-line download ;
● V7.6 DGUS tool for GUI design, Zero code needed;
● Dual Development System: DGUSⅡ/TA(Instruction set);
● Normal View Angle: 70/70/50/70(L/R/U/D);
● Single 8051 chip with dual-core, GUI and Opened OS core. OS core can be programmed by DWIN OS language or Keil C to instead of customer ’MCU .
