Specification
| User interface | 8Pin_3.81mm socket for power supply and serial communication |
| Flash | 8MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times. |
| Expand Flash pads | Three expansion slots support NOR or NAND Flash, up to 64MB(4x16MB NORFlash) or 48MB+512MB (3x16MB NOR Flash + 512MB NAND Flash). The expansion of FLASH in this product requires removing the original FLASH and soldering components such as decoders and capacitors. For related customization, please consult the corresponding salesperson. |
| Buzzer | 3V passive buzzer |
| RTC | Button cell for power supply. Accuracy: ±20ppm @25℃ |
| SD card interface | For DGUS project file downloads (UI, CFG files, kernel, etc.), 4 Mb/srate |
| PGT05 interface | For programming DGUS firmware |
| LCD Type | TN, TFT LCD |
| Viewing Angle | Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) |
| Resolution | 800×480 pixels (0°/90°/180°/270°) |
| Active Area (A.A.) | 154.1mm (W)×85.9mm (H) |
| Backlight Mode | LED |
| Backlight Service Life | >20000 hours |
| Brightness | DMG80480C070_15WTR: 200nit |
| Brightness Control | 100-level brightness adjustment (Flickering may occur at 1%-30% of max brightness; not recommended for use in this range) |
| Note: Use dynamic screen saver to prevent afterimages from prolonged fixed page display. | |
| Type | RTP (Resistive touch panel) |
| Structure | ITO film + ITO glass |
| Light Transmittance | 78%±3% |
| Mode | UART2: RS232 UART4: RS232 ( Only available after OS configuration) UART5: RS485 (Only available after OS configuration) |
|||||
| UART2,4 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
| Output 1 | - | -5.0 | -3.0 | V | ||
| Output 0 | 3.0 | 5.0 | - | V | ||
| Input 1 | -15.0 | -5.0 | - | V | ||
| Input 0 | - | 5.0 | 15.0 | V | ||
| UART2,4 Baud Rate |
3150~3225600bps, typical value of 115200bps | |||||
| UART5 Voltage Level |
Test Condition | Min | Typ | Max | Unit | |
| Output 1 | 2.5 | 5.0 | - | V | ||
| Output 0 | - | -5.0 | -2.5 | V | ||
| Input 1 | 0 | 2.5 | - | V | ||
| Input 0 | - | -2.5 | -0.2 | V | ||
| UART5 Baud Rate |
3150~921600bps, typical value of 115200bps | |||||
| Data Format | UART2: N81 UART4: N81/E81/O81/N82 ,4 modes (OS configuration) UART5: N81/E81/O81/N82 ,4 modes (OS configuration) |
|||||
| Interface Cable | 8Pin_3.81mm Socket | |||||
| Rated Power | <5W | |||||
| Operating Voltage | 9~36V, typical value of 12V | |||||
| Operating Current | 240mA | VCC=12V, max backlight | ||||
| 140mA | VCC=12V, backlight off | |||||
| Recommended power supply: 12V 1A DC | ||||||
| Operating Temperature | -20℃~70℃ (12V @ 60% RH) | |||||
| Storage Temperature | -30℃~80℃ | |||||
| Conformal Coating | None | |||||
| Operating Humidity | 10%~90%RH, typical value of 60% RH | |||||
