Specification
| User interface | 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s |
| NOR Flash | 32MBytes (2*16MBytes NOR Flash), can be used to store user UI files such as fonts, images, music, etc., with erase/write cycles >100,000 times |
| NAND Flash | 512Mbytes, used to store R11 firmware |
| Buzzer | 3V passive buzzer |
| SD card slot 1 | Supports SD card image, audio, and video playback. It can also be used to export camera screenshot files (JPEG) or video files (MP4) |
| SD card slot 2 | Supports downloading of all files (user UI files, CFG files, underlying kernel firmware), displays download statistics on the screen, downloadrate: 4Mb/s. When downloading files, the SD card needs to be formatted in FAT32 format, with a recommended allocation unit size of 4096. |
| Speaker | 2Pin_ 2.0mm interface, external speaker |
| USB interface | R11_USB: Horizontal USB interface, Used for firmware burning. USB interface: Horizontal USB interface, can connect to USB camera or play USB files |
| Reserved module solder pads | This product has reserved 4G modules, Ethernet interfaces (RJ45 socket),and WIFI module pads. Expandable remote update video function and network camera function, communicate with corresponding business if there are related needs |
| LCD Type | TN process TFT display screen |
| Viewing Angle | Normal viewing angle, 70°/70°/50°/70° (L/R/U/D) |
| Resolution | 800×480 pixels (support 0°/90°/180°/270°) |
| Color | 16.7M color (24-bit 8R8G8B) |
| Active Area (A.A.) | 154.08mm (W)×85.92mm (H) |
| Interface | RGB |
| Backlight Mode | LED |
| Backlight Service Life | >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) |
| Brightness | DMG80480T070_41WTC: 250nit |
| DMG80480T070_41WTR: 200nit | |
| DMG80480T070_41WN: 300nit | |
| Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
| Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. | |
| Type | CTP (Capacitive touch panel) |
| Interface | I²C |
| Structure | G+G structure with surface cover of tempered glass |
| Touch Mode | Single point touch and support continuous sliding touch |
| Surface Hardness | 6H |
| Light Transmittance | >85% |
| Life | Over 1,000,000 times touch |
| Type | RTP (Resistive touch panel) |
| Structure | ITO film + ITO glass |
| Touch Mode | Single point touch and support continuous sliding touch |
| Surface Hardness | 3H |
| Light Transmittance | 78%±3% |
| Life | Over 1,000,000 times touch |
| Mode | UART2: ON=TTL/CMOS; OFF=RS232 |
|||||
| Voltage Level | Test Condition | Min | Typ | Max | Unit | |
| Output 1, Iout = -4mA | 4.78 | 5.0 | - | V | ||
| Output 0, Iout = 4mA | - | - | 0.4 | V | ||
| Input 1 | 2.5 | 5.0 | - | V | ||
| Input 0 | - | - | 1.0 | V | ||
| Baud Rate | 3150~3225600bps, typical value of 115200bps | |||||
| Data Format | UART2: N81 |
|||||
| Interface Cable | 8Pin_2.0mm | |||||
| Rated Power | <3W | |||||
| Operating Voltage | 7~36V, typical value of 12V | |||||
| Operating Current | 230mA | VCC=12V, max backlight | ||||
| 90mA | VCC=12V, backlight off | |||||
| Recommended power supply: 12V 1A DC | ||||||
| Operating Temperature | -20℃~70℃ (12V @ 60% RH) | |||||
| Storage Temperature | -30℃~80℃ | |||||
| Conformal Coating | Yes | |||||
| Operating Humidity | 10%~90%RH, typical value of 60% RH | |||||
DMG10600C070_25W
