Specification
INCELL LCM interface | FPC40_0.5mm, MIPI interface |
User interface | FCC50_0.5 mm (See Annex for definitions: table1) |
Flash | 16MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times |
SD card interface | FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s |
LCD Type | IPS, TFT LCD |
Viewing Angle | Wide viewing angle, 85°/85°/85°/85°(L/R/U/D) |
Resolution | 720×720 pixels (support 0°/90°/180°/270°) |
Color | 24-bit 8R8G8B |
Active Area (A.A.) | 73.98mm (W)×73.98mm (H) |
Backlight Mode | LED |
Backlight Service Life | >10000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness) |
Brightness | DMG72720T041_06WTC: 400nit |
Brightness Control | 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range) |
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time. |
Type | CTP (Capacitive touch panel) |
Structure | INCELL structure |
Touch Mode | Single touch and support continuous sliding touch |
Surface Hardness | - |
Light Transmittance | Over 95% |
Life | Over 1,000,000 times touch |
Mode | TTL/CMOS | |||||
Voltage Level | Test Condition | Min | Typ | Max | Unit | |
Output 1, Iout = 1mA | 3.0 | 3.3 | - | V | ||
Output 0, Iout = -1mA | - | 0 | 0.3 | V | ||
Input 1, Iin = 1mA | 2.4 | 3.3 | 5.0 | V | ||
Input 0, Iin = -1mA | 0 | - | 0.5 | V | ||
Baud Rate | 3150~3225600bps, typical value of 115200bps | |||||
Data Format | N81 | |||||
Interface Cable | FCC50_0.5 mm |
Rated Power | <5W | |||||
Operating Voltage | 7~15V, typical value of 12V | |||||
Operating Current | 160mA | VCC=12V, max backlight | ||||
80mA | VCC=12V, backlight off | |||||
Recommended power supply: 12V 1A DC |
Operating Temperature | -20℃~70℃ (5V @ 60% RH) | |||||
Storage Temperature | -30℃~80℃ | |||||
Conformal Coating | Yes | |||||
Operating Humidity | 10%~90%RH, typical value of 60% RH |