4.0 Inch Intelligent Display Model: DMG48480F040_02WTCZ02(COF Series)

DWIN 480*RGB*480, COF LCD Display

Features:

● Based on T5L0-Q88, running DGUS II system.

● 4 inch, 480*480 pixels resolution, 262K colors, IPS-TFT-LCD, wide viewing angle.

● Integrated black and OCA bonded capacitive touch panel.

● COF structure. The entire core circuit of the smart screen is fixed on the FPC of LCM, featured by light and thin structure, low cost and easy production.

Send email to us Datasheet

Specification

Product Tags

Specification

ASIC Information

T5L0-Q88 ASIC

T5L0-Q88 ASIC is a small package, low-power, cost-effective, GUI and application highly integratedsingle-chipdual-core ASIC designed by DWIN Technology for small-size LCD and mass produced in 2023.

Display

Color			262K colors
LCD Type			IPS, TFT LCD
Viewing Angle			Wide viewing angel, typical value of 85°/85°/85°/85°(L/R/U/D)
Display Area（A.A）			71.86mm (W)×70.18mm (H)
Resolution			480×480
Backlight			LED
Brightness			DMG48480F040_02WTCZ02:50nit

Voltage & Current

Power Voltage			4.5~5.5V
Operation Current			280mA VCC=5V, max backlight
			100mA VCC=5V, backlight off

Reliability Test

Working Temperature			-10℃~60℃
Storage Temperature			-20℃~70℃
Working Humidity			10%~90%RH, typical value of 60% RH

Interface

User Interface			24Pin_0.5mm FPC
Baud Rate			3150~3225600bps
Output Voltage			Output 1;3.0~3.3 V
			Output 0;0~0.3 V
Input Voltage			Input 1；3.3V
			Input 0；0~0.5V
Interface			UART2: TTL; UART3: TTL;（Only available after OS configuration UART4: TTL;（Only available after OS configuration）
Data Format			UART2: N81; UART3: N81/E81/O81/N82;4 modes (OS configuration) UART4: N81/E81/O81/N82;4 modes (OS configuration)

External Interface

PIN	Definition	Type	Functional Description
1	CAN_TX	O	CAN interface
2	CAN_RX	I	CAN interface
3	TX3	O	UART3 Output
4	RX3	I	UART3 Input
5	TX2	O	UART2 Output
6	RX2	I	UART2 Input
7	TR4	-	-
8	TX4	O	UART4 Output
9	RX4	I	UART4 Input
10	TX1	O	UART1 Output
11	RX1	I	UART1 Input
12	ADC0	I	ADC input. 12-bit resolution in case of 3.3V power supply. 0-3.3V input voltage.
13	ADC1	I
14	ADC6	I	Connect the NTC inside the enclosure
15	ADC7	I	Connect the NTC located on the enclosure wall
16	PWM3	O	Buzzer/speaker driver. The external 10K resistor should be pulled down to the ground to ensure that power-on is low level.
17	GND	P	GND
18	GND	P	GND
19	+5V	P	Power supply, DC4.5-5.5V.
20	+5V	P	Power supply, DC4.5-5.5V.
21	I²C_SDA	IO	RTC/proximity sensor/humidity sensor multiplexing.
22	I²C_SCL	IO	RTC/proximity sensor/humidity sensor multiplexing.
23	EX1	IO	External interrupt (INT1)
24	EX0	IO	External interrupt (INT0)