4.0 Inch HMI Touch Panel DMG80480C040_03W(Commercial Grade)

Specification

DWIN 480*RGB*800, UART Display

Features:

● Based on T5L1, running DGUS II system, commercial grade,

● Resistive /Capacitive/No touch,16.7M Colors,24bit,480×800 pixel;

● UART2: TTL/CMOS;UART4: TTL/CMOS ;

● Download via SD card or on-line serial port;

● Easy-to-use DWIN DGUS V7.6 tool to make GUI ;

● Dual Development System: DGUS II/ TA(Instruction set);

● IPS View Angle: 85°/85°/85°/85° (L/R/U/D) ;

● With GUI & OS dual-core, GUI with rich controls,support self-designed customized products based on T5L.

Send email to us Datasheet 3D Data

Rated Power

Operating Voltage

4.5~5.5V, typical value of 5V

Operating Current

VCC=5V, max backlight

VCC=5V, backlight off

Recommended power supply: 5V 1A DC

Video

Hardware and interface description

LCM interface	FPC40_0.5mm, RGB interface
TP interface	Capacitive touch: IIC interface
TP interface	Resistive touch: FPC4_1.0mm
User interface	10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash	16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Expand Flash	Three expansion slots support NOR or NAND Flash, up to 64MB(4x16MB NOR Flash) or 48MB+512MB (3x16MB NOR Flash + 512MB NAND Flash).
Buzzer	3V passive buzzer.
SD card interface	For DGUS project file downloads (UI, CFG files, kernel, etc.), 4 Mb/s rate.
Reserved module interface	Supports DWIN Wi-Fi modules (e.g., Wi-Fi-20) and USB download modules (e.g., HDL702).
PGT05 interface	For programming DGUS firmware.

Display Parameters

LCD Type	IPS, TFT LCD
Viewing Angle	Wide viewing angle, 85°/85°/85°/85°（L/R/U/D）
Resolution	480×800 pixels (0°/90°/180°/270°)
Color	16.7M color (24-bit 8R8G8B)
Active Area (A.A.)	51.4mm (W)×86.0mm (H)
Backlight Mode	LED
Backlight Service Life	>20000 hours (Time of the brightness decaying to 50% on the condition of continuous working with the maximum brightness)
Brightness	DMG80480C040_03WTC: 400nit
	DMG80480C040_03WTR: 300nit
	DMG80480C040_03WN: 450nit
Brightness Control	0~100 grade (When the brightness is adjusted to 1%~30% of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.

Touch Parameters

Type	Capacitive touch panel
Structure	G+G structure with tempered glass surface and hardness ≥ 6H.
Light Transmittance	>85%

Type	Resistive touch panel
Structure	ITO film + ITO glass
Light Transmittance	78%±3%

Serial Interface Parameters

Mode	UART2: TTL/CMOS UART4: TTL/CMOS(Only available after OS configuration)
Voltage Level	Test Condition	Min	Typ	Max	Unit
	Output 1, Iout = -4mA	3.0	3.3	-	V
	Output 0, Iout = 4mA	-	0	0.3	V
	Input 1	2.4	3.3	5.0	V
	Input 0	0	-	0.5	V
Baud Rate	3150~3225600bps, typical value of 115200bps
Data Format	UART2: N81 UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable	10Pin_1.0mm

Electrical specifications

Operating environment