3.5 Inch LCD Display
DMG80480T035_01W(Industrial Grade)

DWIN, 480*800 pixels resolution, IPS-TFT-LCD

Features:

● Based on T5L0, running DGUS II system, industrial grade;

● No touch LCM/Resistive Uart touch screen/Capacitive touch Display Optional;

● 3.5-inch, 480*800 pixels resolution, 262K colors, IPS-Screen-LCD, wide viewing angle;

● With conformal coating;

● LCM interface, FPC40_0.5mm, 3SPI+RGB interface;

● Viewing Angle: Wide viewing angle, 85°/85°/85°/85°(L/R/U/D);

● Download files by SD interface can be displayed in statistics.


Specification

Specification

Product Tags

Specification

DMG80480T035_01WTC
fgj
Hardware and interface description
User interface 10Pin_1.0mm latching socket for power supply and serial communication. Download rate(typical value): 12KByte/s
Flash 16MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
Buzzer 3V passive buzzer
RTC Super-capacitor for power supply. Accuracy: ±20ppm @25℃. It can work normally for 7 days after power failure
SD card slot FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal
Display Parameters
LCD Type IPS process TFT display screen
Viewing Angle Wide viewing angle (typical values are 85°/85°/85°/85°), high contrast, and good color reproduction
Resolution 480×800 pixels (support 0°/90°/180°/270°)
Color 18-bit 6R6G6B
Active Area (A.A.) 75.60mm (W)×45.36mm (H)
Backlight Mode LED
Backlight Service Life >30000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
Brightness DMG80480T035_01WTC: 250nit
DMG80480T035_01WTR: 250nit
DMG80480T035_01WN: 300nit
Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
Touch Parameters
Type Capacitive touch panel
Structure G+G structure with tempered glass surface and hardness ≥ 6H
Light Transmittance >85%
  
Type RTP (Resistive touch panel)
Structure ITO film + ITO glass
Light Transmittance 78%±3%
Serial Interface Parameters
Mode UART2: TTL/CMOS
UART4: TTL/CMOS(Only available after OS configuration)
Voltage Level Test Condition Min Typ Max Unit
Output 1, Iout = 1mA 3.0 3.3 - V
Output 0, Iout = -1mA - 0 0.3 V
Input 1, Iin = 1mA 2.4 3.3 5.0 V
Input 0, Iin = -1mA 0 - 0.5 V
Baud Rate 3150~3225600bps, typical value of 115200bps
Data Format UART2: N81
UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
Interface Cable 10Pin_1.0mm
Electrical specifications
Rated Power <5W
Operating Voltage 4.5~5.5V, typical value of 5V
Operating Current 180mA VCC=5V, max backlight
85mA VCC=5V, backlight off
Recommended power supply: 5V 1A DC
Operating environment
Operating Temperature -20℃~70℃ (5V @ 60% RH)
Storage Temperature -30℃~80℃
Conformal Coating Yes
Operating Humidity 10%~90%RH, typical value of 60% RH
Application

1

12 (1)


  • Previous:
  • Next:

  • Function working principle共用评估板开发流程图

    Related Products