10.1 Inch HMI Touch Monitor DMG10600C101_03W(Commercial Grade)

10.1 Inch Smart LCD Display Module

Features:

● No/Resistive/Capacitive touch screen Optional;

● Based on self-designed T5L ASIC, 10.1 Inches, 16.7M Colors, 1024*600 Pixel TFT LCD;

● 8Pin_2.0mm connection wire,TTL/COMS available;

● Download via SD card or on-line serial port;

● Dual Development System: DGUS II/ TA(Instruction set);

● No coding skills required, easy-to-use DWIN DGUS V7.6 GUIs Development;

● Widely used witd Arduino,STM32,Microchip ,ESP8266 and so on .


  • :
  • Specification

    Description

    Product Tags

    Video

    Specification

    国际站PCB模板
    1 (5)
    Hardware and interface description
    LCM interface FPC50_0.5mm, RGB interface
    TP interface Capacitive touch: COB structure, IIC interface
    Resistive touch: FPC4_1.0mm
    User interface 8Pin_2.0mm socket for power supply and serial communication. Download rate(typical value): 12KByte/s
    Flash 16 MBytes NOR Flash, for fonts, pictures and audio files. Rewrite cycle: over 100,000 times
    Buzzer 3V passive buzzer. Power: <1W
    SD card interface FAT32. Download files by SD interface can be displayed in statistics. Download rate: 4Mb/s
    Reserved module interface Wi-Fi module: connect to the cloud platform to update remotely;
    USB module: download files by USB flash disk
    PGT05 interface When product crashes by accident, you can use PGT05 to update DGUS kernel and make the product return to normal
    Display Parameters
    LCD Type IPS, TFT LCD
    Viewing Angle Wide viewing angle, 70°/70°/50°/70° (L/R/U/D)
    Resolution 1024×600 pixels (0°/90°/180°/270°)
    Active Area (A.A.) 222.7mm (W)×125.3mm (H)
    Backlight Mode LED
    Backlight Service Life >20000 hours (Time of the brightness decaying to 50%on the condition of continuous working with the maximum brightness)
    Brightness DMG10600C101_03WTC: 200nit
    DMG10600C101_03WTR: 150nit
    DMG10600C101_03WN: 250nit
    Brightness Control 0~100 grade (When the brightness is adjusted to 1%~30%of the maximum brightness, flickering may occur and is not recommended to use in this range)
    Note: You can use dynamic screen saver wallpapers to avoid afterimages caused by fixed page display for a long time.
    Touch Parameters
    Type Capacitive touch panel
    Structure G+G structure with tempered glass surface and hardness ≥ 6H
    Light Transmittance >85%
      
    Type RTP (Resistive touch panel)
    Structure ITO film + ITO glass
    Light Transmittance 78%±3%
    Serial Interface Parameters
    Mode UART2: ON=TTL/CMOS; OFF=RS232
    UART4: ON=TTL/CMOS; OFF=RS232(Only available after OS configuration)
    Voltage Level Test Condition Min Typ Max Unit
    Output 1, Iout = -4mA 4.78 5.0 - V
    Output 0, Iout = 4mA - - 0.4 V
    Input 1 2.5 5.0 - V
    Input 0 0 - 1.0 V
    Baud Rate 3150~3225600bps, typical value of 115200bps
    Data Format UART2: N81
    UART4: N81/E81/O81/N82 , 4 modes (OS configuration)
    Interface Cable 8Pin_2.0mm
    Electrical specifications
    Rated Power <5W
    Operating Voltage 6~15V, typical value of 12V
    Operating Current 270mA VCC=12V, max backlight
    100mA VCC=12V, backlight off
    Recommended power supply: 12V 1A DC
    Operating environment
    Operating Temperature -10℃~60℃ (12V @ 60% RH)
    Storage Temperature -20℃~70℃
    Conformal Coating None
    Operating Humidity 10%~90%RH, typical value of 60% RH
    Application

    1

    12 (1)


  • Previous:
  • Next:

  • 23211q 123123

  • Related Products